Siemens SINUMERIK 840 Planning Manual page 197

11.92
9.1.24 Display "Unload to NC program"
(SINUMERIK 880/880 GA2 only)
Unload to NC program:
Loading program, new:
Magazine Location
All magazines
*
Magazine
Magazine
Marked tools
RESET/ SELECT
END
The recall key is unassigned in this display. A return to a higher menu level is possible only
with the function key "RESET/END".
After selecting the unloading type and start, the new loading program number (% 9999) and
the tool currently being unloaded are displayed via magazine number, location number, T
number, duplo number and active bit "*".
When unloading is completed, the unloaded tools are contained in the newly generated loading
program % 9999.
The tools can be reloaded into the magazines after selecting the loading program and NC
Start.
Softkey "RESET/END"
Aborts the unloading process with NC Reset.
Returns along menu tree by one level.
© Siemens AG 1991 All Rights Reserved
SINUMERIK 840/880 (PJ)
%
Cutting edge T No.
to
and chained magazines
START
6FC5 197-0AA40-1BP1
9 Examples
9.1.24 Display "Unload to NC program"
Duplo No.
*
9–25