Installing, connecting, commissioning
4.1 Preparing installation
Procedure – upright mounting on DIN rails
4.1.3.3
Wall mounting
The wall mounting is suitable for horizontal mounting of the device.
Requirements
● Mounting bracket
Note
Use only the screws supplied to mount the mounting bracket. Longer screws can damage
the interior of the device
● A T10 screwdriver
● Two wall plugs and two screws
24
1.
Place the mounting bracket on the rear of the
device.
2.
Fasten the mounting bracket with two screws
supplied.
3.
Place the device on the mounting bracket onto the
DIN rail.
7KN POWERCENTER 3000
Manual, 10/2019, L1V30579222003-01