Information On Use - Siemens SENTRON 7KN POWERCENTER 3000 Manual

For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer's exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity (https://www.siemens.com/industrialsecurity).
2.3

Information on use

NOTICE
Possible functional restrictions when the function of the plant has not been validated
The device is tested and certified based on the technical standards. In rare cases,
functional restrictions can occur during operation of your plant.
To avoid functional restrictions, validate the correct function of the plant.
Note
Use in industry without additional protective measures
The device was designed for use in a normal industrial environment according to IEC 60721-
3-3.
NOTICE
Cleaning
Clean the surface of the housing with a damp cloth and make sure that no water enters the
interior of the device.
7KN POWERCENTER 3000
Manual, 10/2019, L1V30579222003-01
Safety information
2.3 Information on use
11