Table of Contents
Advertisement
BD-940
This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions that connect to the internet.
Notes
•
Make sure that the LAN cable is connected to this
Player.
•
For manually performing the setting, the following
information of the connected router or modem
is required. Confirm the information prior to the
setting.
– IP address, netmask, gateway, DNS IP address
•
Besides, if specifying a proxy server, the following
information specified from your internet service
provider is also required.
Confirm the information prior to the setting.
– IP address and port number of the proxy server
Remote control
"
" (RIGHT) key
"
" (UP) key
"ENTER" key
"
" (LEFT) key
"
" (DOWN) key
"SETUP" key
1 Press SETUP.
2 Press
/
/
then press ENTER.
3 Press
/
to select "Communication
Setup" , then press ENTER.
4 Select "Ethernet Setup (BD-LIVE)" , then
press ENTER.
16
Communication Setup
/
to select "Settings" ,
5 Press
/
to select "Change" , then press
ENTER.
Setting the info. of the Ethernet
[Current Setup]
IP Address : Auto Setup
Netmask
: Auto Setup
Gateway
: Auto Setup
DNS
: Auto Setup
Proxy
: Not Use
Change
For initializing the current setting, select "Initialize",
then press ENTER.
6 For setting the IP address, press
select "Yes" or "No" , then press ENTER.
Do you obtain the IP address
automatically?
Yes
IP Address
Netmask
Gateway
Next
•
If selecting "Yes":
The IP address is automatically obtained.
•
If selecting "No":
T h e I P a d d re s s , n e t m a s k a n d g a t e w a y
are manually entered using the screen for
inputting characters.
Regarding each of the setup values, confirm
the specifications of your broadband router.
7 Select "Next" , then press ENTER.
8 Enter the primary and secondary IP addresses
using the screen for inputting characters.
Regarding each of the setup values, confirm
the specifications of your broadband router.
9 Select "Next" , then press ENTER.
Initialize
/
to
No
Advertisement
Table of Contents
