Download Print this page

Sony HKDW-704 Installation And Maintenance Manual page 14

Gps unit

Hide thumbs Also See for HKDW-704:

Enlarged version

1-11. Installing the GPS Module

1. Attach the FCC mark label on the cover of the GPS

module.

2. Connect the coaxial cable to pin-1 of the GPS module

connector and attach the cover. (Fig.1) Connect the

GPS harness to pin-10 of the GPS module connector,

and attach the cover to the GPS module. (Fig.1)

3. Bend the four claws of the cover in the direction of the

arrow. (Fig.2)

Be sure to use long nose pliers to bend the claw of the

cover to protect operator from injury due to the sharp

edge.

1-12 (E)

FCC mark label

Cover

4. While removing extra deflection of coaxial cable, pull

it in the direction of arrow A. Place the GPS module

on top of the module clamp.

Pin-1

Coaxial

cable

Fig.1

Cover

GPS module

Coaxial cable

Fig.2

Claw

Claws

Module clamp

HKDW-704