The Advanced Menu - Siemens SIMATIC Field PG P4 Manual

Configuring the SIMATIC Field PG P4
5.3

The Advanced Menu

Menu Structure
F1
ESC
Fig. 5-9
Settings in the Advanced Menu
Installed O/S
Reset Configuration
Data
Serial port A
5-14
PhoenixBIOS Setup Utility
Main Advanced Security
Installed O/S:
Reset Configuration Data:
Serial port A:
S5 TTY port:
Parallel port:
Mode:
Base I/O address:
Interrupt:
IRQ Resource Exclusion
Local Bus IDE adapter:
Legacy USB Support:
Help Select Item
Exit Select Menu
"Advanced" Menu
Plug & play means that all modules are automatically detected
and installed, providing they support the Plug&Play functionality.
[other] BIOS handles the entire Plug&Play capability, default
configuration
[Win95] The operating system handles a part of the Plug& Play
[Win98] functions
[WinXP/2000]
[Yes] All installations under Plug&Play are deleted and
reconfiguration is triggered the next time the system
boots. The entry is then reset to [No]. System
components that do not support Plug&Play have to be
entered manually.
[No] The Plug&Play system components are initialized
after the next system start.
Configure Serial Port A with the options:
[Disabled] No configuaration
[Enabled] User configuration
[Auto] BIOS or OS chooses confuguration.
Power Boot Version
Item Specific Help
[ WinXP/2000 ]
[ No ]
Select the operating
system installed
[Auto]
on your system which
[Enabled]
you will use most
[Disabled]
commonly.
[Bi-directional]
Note: An incorrect
[378]
setting can cause
[IRQ 7]
some operating
systems to display
unexpected behavior.
[Primary & Secondary]
[Disabled]
+ / – Change Values F9
Enter Select
Sub-Menu F10
SIMATIC Field PG P4 Manual
Exit
Setup Defaults
Save and Exit
A5E00180080-04