Siemens Sinumerik 840D sl Programming Manual page 755

Param Param
No.
Mask intern
14
_TECHN
O
15
_PITM
16
_PTAB
17
_PTABA
18
_GMODE
19
_DMODE
20
_AMODE
1)
Technology fields may be hidden, depending on the setting date SD52216 MCS_FUNCTION_MASK_DRILL
2)
Parameters 15, 16 and 17 are only used for thread selection in the input mask thread tables. The thread tables cannot be
accessed via cycle definition in cycle run time.
Job planning
Programming Manual, 02/2011, 6FC5398-2BP40-1BA0
Explanation
1)
Technology
UNITS: Exact stop response
0 = Exact stop active as before cycle call
1 = Exact stop G601
2 = Exact stop G602
3 = Exact stop G603
TENS: Forward control
0 = with/without forward control active as before cycle call
1 = with forward control FFWON
2 = without forward control FFWOF
String as marker for pitch input
String for thread table ("", "ISO", "BSW", "BSP", "UNC")
String for selection from thread table (e.g. "M 10", "M 12", ...)
Reserved
Display mode
UNITS: Machining plane G17/G18/G19
0 = Compatibility, the level effective before cycle call remains active
1 = G17 (only active in the cycle)
2 = G18 (only active in the cycle)
3 = G19 (only active in the cycle)
TENS: Reserved
HUNDREDS: Reserved
THOUSANDS: Compatibility mode (or recompilation input mask only), if MD 52216 bit0 = 1
0 = Technological parameters are displayed (compatibility): TECHNO parameters effective
1 = Technology parameters are not displayed: technology active "as before cycle call"
Alternative mode
UNITS: Drilling depth Z1 (abs/inc)
0 = Compatibility, from DP/DPR programming
1 = Incremental
2 = Absolute
2)
2)
Programming cycles externally
16.1 Technology cycles
2)
1)
755