AT Command Set
3.16 AT+FMDL Identify Product Model
Read command
Send the model identification to the TA
AT+FMDL?
Response
Gipsy Soft Protocolstack
OK
Reference
Note
Siemens
Used for Faxclass 2 only
3.17 AT+FMFR Request Manufacturer Identification
Read command
Send the manufacturer identification to the TA
AT+FMFR?
Response
SIEMENS
OK
Reference
Note
Siemens
Used for Fax class 2 only
3.18 AT+FOPT Set bit order independently
Write command
Model specific command to set bit order independently of the understanding
which is "mirrored" and which is direct.
AT+FOPT=<opt>
Response
OK
Parameter
<opt>
Reference
Note
Siemens
Used for Fax class 2 only
TC3X_ATC_01_V04.00
0 non-standard
1 standard
Page 52 of 204
29.05.2002