Advertisement
(See Figure 9 for Step 14: Installing Front Panel Assembly)
14. Connect cables to new front panel assembly. Install new front panel assembly onto the front
of the mainframe and insert screws (8) in the holes indicated in Figure 9. Using a T15 Torx
screwdriver, tighten screws (8) to 5 in-lbs. Do not overtorque. You may need to press down
the back of the flexible disk drive to allow it to fit in the slot on the front panel assembly.
Ensure front panel is recessed in metal frame before tightening screws.
HP E2479A Upgrade Procedures
Figure 9. Installing Front Panel Assembly
23
Advertisement
