Electra Elite IPK II
___________________________________________________________________________________
14.4
___________________________________________________________________________________
System Hardware Manual
Installing Line Cards and Plastic Panels
Line key designations are entered on a line card that is placed on the terminal
to provide quick line-key reference. The line card can be changed when
necessary. The plastic panel is placed on top of the line card to hold it in
place. To change line card:
1.
Refer to
Figure 8-49 Removing Plastic
panel to remove it.
2.
Refer to
Figure 8-50 Installing New Line
over the keys on the Terminal.
Panel, and lift up on the plastic
Figure 8-49 Removing Plastic Panel
Card, and place new line card
Figure 8-50 Installing New Line Card
Document Revision 3
8 - 37