Siemens DMS8000 Application & Planning page 60

Automation level configurations
Further options
60
Building Technologies
CPS Fire Safety
The following are available for all of the NK82xx products:
NE8001
DF8090 power supply
supervision module
NKA8011-A1
NZ8201
DF8020
DF8040
DF8045
DF8046
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
Wall-mountable, metallic cabinet with DIN-rail, including power
supply unit.
Input: 100 – 240 Vac; Output: 12Vdc 4A.
2
Optional module on I C bus for supervising the NK82xx power
supply and detecting power failures and battery low conditions. It is
not needed when NK82xx is installed in a fire or intrusion control
unit, whose power supply is already supervised.
Mounting plate for NK823x (to be used in combination with mount-
ing kits NZ8201 when the NK823x needs to be installed without the
plastic housing in a control unit).
NK82xx mounting kit for CS11.
Card holders and cable set for installing NK82xx in CS11 or CS440.
8-output (non-supervised) relay module connected via I
controlling digital outputs.
NK823x: Max. 4 modules
For more connectivity, it is necessary to use a DF8003 CPU on one
of the serial connections.
8-input (non-supervised) module connected via I
digital inputs.
NK823x: Max. 4 modules
For more connectivity, it is necessary to use a DF8003 CPU on one
of the serial connections.
4-balanced input module connected via I
supervised digital inputs.
NK823x: Max. 4 modules
For more connectivity, it is necessary to use a DF8003/CF8003
CPU on one of the serial connections.
4-balanced input module connected via I
supervised digital inputs.
NK823x: Max. 4 modules
For more connectivity, it is necessary to use a DF8003/CF8003
CPU on one of the serial connections.
2
C bus for
2
C bus for acquiring
2
C bus for acquiring NC
2
C bus for acquiring NO
09.2016