Display Messages - Bosch Integral TS13 Operating Instructions Manual

Display messages

The display contains important information on calls and telephone settings.
This includes the messages that are shown on the idle display.
The idle display appears when you press the "Arrow up" or the "Menu" key.
Menu displays
A
Assigning line for PAxx
(only TH) You have assigned an exchange line for a telephone in your part-
ner group.
You can now complete a connection for this partner or the partner can dial
an external number himself.
Audio/Contrast
Set the acoustic pattern and volume for the loudspeaker and alter the
contrast of display messages.
C
Call back
If a called party is busy, you can program your phone to transmit a signal
as soon as the line is free again. Your phone and the phone of the pre-
viously busy subscriber then ring and you can set up the call. However, this
is only possible for calls within your system.
Call charges
Display charges in currency or in units: for the last call and the current total
of all calls.
Call diversion
You can divert calls to another telephone in your system.
You can also divert calls to an external line depending on the system.
D
Display call list
All incoming calls that you did not answer are listed in the call list. You can
answer these calls now or delete them from the call list.
If in doubt, look it up
77