Bosch Integral TS13 Operating Instructions Manual page 78

If in doubt, look it up
Diver. -
Call diversion: You can decide if you want to be connected to the target of
the call diversion or if you want to end the call.
– connect: Press the "Enter" key.
– end call: Hang up the receiver.
Do not disturb
If you do not wish to be disturbed by calls, you can switch the ringing tone
off. Calls are then only indicated by a short beep and the illuminated LED.
H
Headset present
The message appears in the idle display if a headset is connected and
switched on. To switch the headset off: Select the line.
L
Line assigned
(only TH) This status message blinks in your display: An exchange line has
been assigned for your connection using a partner telephone. You can now
dial or a connection can be completed for you using the partner telephone.
Lock
You can protect your telephone from unauthorized users. You can also de-
termine which functions are to remain available after the lock is activated
(lock levels must be enabled by your BOSCH TELECOM service represen-
tative).
M
Messages
If the symbol for "Message" appears in the idle display (
messages are waiting for you in the telephone system. You can call them
up at any time.
78
Display messages "
), one or more