Registering Data Area Corresponding To Tag/Instance - Panasonic AFP0HC32ET User Manual

3.4.4 Registering Data Area Corresponding to Tag/Instance

For setting the data area manually, change the auto allocation to "No" in the "EtherNet/IP
Basic Configuration". When it is set to "Yes", this procedure is not required.
The following procedure is explained on the assumption that the EtherNet/IP setting screen
has been activated.
PROCEDURE
1. Select the target I/O map from Scan List.
"I/O Map Setting" screen appears.
2. Press "Add" in the Device Allocation area.
3. Specify "Device Type", "Device No." and "Data Size", and press "Register".
In this example, "Device Type = LD", "Device No. = 30" and "Data Size = 10".
KEY POINTS
Register Tag/Instance for each connected originator.
•
When connected from more the one originators, the connections are
•
distinguished by each instance ID/tag name.
3.4 Settings of Connection Using FP0H as Target
3-19