“Hi-Light” Double Radiant Zone - Kenwood CK 235 C SL Instructions For Use And Installation Advice

"HI-LIGHT" DOUBLE RADIANT ZONE
The heating element is formed of a coil of resistant material which reaches the working
temperature quickly .
Operation of the cooking zone is controlled by a continuous energy regulator from 1 to 12
(maximum temperature) (fig. 3.3).
To turn on both zones of the double element, turn the double element knob fully clockwise
to the position .
To reduce the heat of the full double element, turn its knob anticlockwise to setting 12 or
lower . Adjust the heat during cooking as necessary .
Note: if you leave the knob at the position, the full double element will remain at the
highest heat setting .
To return to using only the inner zone of the double element, first turn the knob to the "
0
" (off)
position (you should feel a click) and then clockwise to a setting from 1 to 12 .
Second element
12
1
11 2
3
10
4
9
8
5
6
7
DOUBLE ZONE
Fig. 3.3 Fig. 3.4
12