Querying And Setting The Status Of The Port Auto-Adaptation Mode (Self_Adaption) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Parameters
Parameter
devicename
Usage Instruction
None
Example
# Display the interrupt information reported by the hinic0 hardware module.
[root@localhost ~]# hinicadm fm_show -i hinic0
********no fm info!********
6.1.4.37 Querying and Setting the Status of the Port Auto-adaptation Mode
(self_adaption)
Function
The self_adaption command is used to query and set the status of the port auto-adaptation
mode.
Format
hinicadm self_adaption -i <devicename> -p <portid>
hinicadm self_adaption -i <devicename> -p <portid> -s <status> [-d]
Parameters
Parameter
devicename
portid
status
Usage Instruction
l
l
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 whose FEC mode is to
be queried in the system.
Description
Indicates the name of the
target IN200 in the system.
Indicates the target port
number.
Indicates the status of the port
auto-adaptation mode.
If the command contains -d, the setting is permanent and takes effect after a restart.
If the command does not contain -d, the setting is not permanent and will be restored to
the factory setting after a restart.
Copyright © Huawei Technologies Co., Ltd.
Value
Example: hinic0 and hinic1
Value
Example: hinic0 and hinic1
-
l enable
l disable (default value)
6 Management Tools
97