Store (M1700A & M1701A Only); Config; Checkdisk (M1700A & M1701A Only); A.02.Xx And Higher Software - HP PageWriter XL M1705B Service Manual

Note 1
Yb
Revision A.02.XX and higher software enables the M1700A to
transmit Auto 6x2 ECGs to the F.A.A. ECG management system.
f-7
Exit Returns you to the previous menu.
Store
This key stores the current Auto ECG on the disk (Manual ECGs
(M1700A & M1701A only)
cannot be stored). An ECG must have a patient ID number before it
can be stored. If the ECG to be stored has no patient ID when you
attempt to store it, the cardiograph asks if you want to give it one. If
your answer is "No," the cardiograph aborts the store attempt and
returns you to the alternate main menu. If your answer is "Yes," the
cardiograph takes you through the patient ID entry process as if you
pressed the (ID] key on the front panel.
Once you enter a patient ID and exit the patient ID entry process,
the cardiograph stores the ECG on the disk. The message Storing
ECG appears while the ECG is being stored. Then the display returns
to the main menu.
Note .I
w
If the disk you inserted in the drive is new and unformatted, the
cardiograph will ask if you want the disk formatted. Press Yes if you
'do (formatting takes about 90 seconds), or insert a formatted disk in
the drive at this time. A disk must be formatted for storage to take
place.
The A.02.XX and higher software allows you to erase (reformat)
flexible disks by using CheckDisk (see below).
Config
This function allows you to configure the PageWriter. See Chapter 2
for details.
CheckDisk
(M1700A & M1701A only)
A-01-Xx software
With the A.Ol.XX software, CheckDisk allows you to determine
how much storage capacity remains on the disk. When you press
CheckDisk, a message similar to the following appears in the
display:
Disk 25% full
A.OP.XX and Higher Software
The A.02.XX and higher software enables CheckDisk to reformat
flexible disks as well as determine how much storage space is
available on the disk.
3-12 Operation