HP PageWriter XL M1705B Service Manual page 179

Figure 7-21. Disk Drive Mounting Screws.
4. Lift the disk drive enough to disconnect the data cable and power
cable.
5. Remove the disk drive from the chassis.
6. Remove the screws that attach the vibration mounts to the disk
drive and set the mounts aside for reuse.
7. Remove the screw that attaches the ground strap to the bottom of
the disk drive; set the ground strap and screw aside for reuse.
Replacing the Disk
To replace the disk drive, reverse the removal procedure.
Drive
7-32 Removal and Replacement