Signals To Axis/Spindle (Db31; Signals From Axis/Spindle (Db31 - Siemens SINUMERIK 840Di Function Manual

Detailed Description
2.9 Mode group, channel, program operation, reset response (K1)
2.9.5

Signals to axis/spindle (DB31, ...)

DB31, ...
DBX10.0 REPOSDELAY
Edge evaluation: no
Signal state 1 or The REPOS offset of the axis is first applied with its next programming.
edge change
0 → 1
Signal state 0 or There is no REPOS offset.
edge change
1 → 0
Special cases, The signal is not relevant for path axes.
errors, ......
Corresponds to .... DB21, ... DBX31.0 - DBX31.2 (REPOSPATHMODE0-2)
DB31, ... DBX70.2 (REPOS Delay Ackn)
DB31, ... DBX72.0 (REPOSDELAY)
2.9.6

Signals from axis/spindle (DB31, ...)

DB31, ...
DBX70.0 REPOS offset
Edge evaluation: no
Signal state 1 or A REPOS offset must be applied for the appropriate axis.
edge change
0 → 1
Signal state 0 or No REPOS offset need be applied for the appropriate axis.
edge change
1 → 0
Corresponds to .... DB31, ... DBX70.1 (REPOS offset valid)
2-110
Signal(s) updated: cyclic
Signal(s) updated: cyclic
NC/PLC Interface Signals (Z1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0