Sony 85P Operating Instructions Manual page 79

Audio performance
Frequency response
2-channel (FS=48 kHz) mode:
20 Hz to 20 kHz +0.5 dB/–1.0 dB
4-channel (FS=32 kHz) mode:
20 Hz to 14.5 kHz +0.5 dB/–1.0
dB
Dynamic range More than 85 dB
Distortion (THD + N)
Less than 0.05% (FS=48 kHz)
Input connectors
Digital signal inputs
QSDI INPUT BNC type, QSDI format
(270 Mbps)
SDI INPUT (with optional DSBK-120/120P SDI
Input/Output Board installed)
BNC type ( 2, active-through),
Serial Digital Interface format
(270 Mbps), SMPTE 259M/
CCIR656-III
Analog video inputs
REF. VIDEO IN BNC type ( 2, loop-through), black
burst, 0.286 Vp-p, 75 , sync
negative
VIDEO IN BNC type ( 2, loop-through),
composite, 1.0 Vp-p, 75 , sync
negative
COMPONENT VIDEO IN
BNC type ( 3), component
Y: 1.0 Vp-p, 75 , sync negative
R–Y, B–Y: 0.7 Vp-p, 75
S VIDEO IN DIN 4-pin
Y: 1.0 Vp-p, 75
C: 0.286 Vp-p, 75
0.3 Vp-p, 75
Analog audio inputs
AUDIO IN XLR 3-pin, female ( 4),
+4/0/–6 dBu, 600
ON/OFF switch set to ON),
10 k (with switch OFF),
balanced
Digital audio inputs
DIGITAL AUDIO (AES/EBU) INPUT
Time code input
TIME CODE IN (with optional DSBK-130/130P Time
Code Input/Output Board installed)
Output connectors
Digital signal outputs
QSDI OUTPUT
SDI OUTPUT (with optional DSBK-120/120P SDI
Input/Output Board installed)
Analog video outputs
REF. VIDEO OUT
VIDEO OUT 1, 2 (SUPER)
COMPONENT VIDEO OUT
(75%)
S VIDEO OUT
(DSR-85)
(DSR-85P)
(with 600
XLR 3-pin, female ( 2), 110 ,
balanced
BNC type, SMPTE time code
(DSR-85), EBU time code (DSR-
85P), 0.5 Vp-p to 18 Vp-p,
3.3 k , unbalanced
BNC type, QSDI format
(270 Mbps)
BNC type ( 2, active-through),
Serial Digital Interface format
(270 Mbps), SMPTE 259M/
CCIR656-III
BNC type, composite sync,
0.286 Vp-p, 75 , sync negative
(with burst)
BNC type ( 2), composite,
1.0 Vp-p, 75 , sync negative
BNC type ( 3), component
Y: 1.0 Vp-p, 75 , sync negative
R–Y, B–Y: 0.7 Vp-p, 75
DIN 4-pin, Y and C separated
Y: 1.0 Vp-p, 75
C: 0.286 Vp-p, 75 (burst level)
(DSR-85)
0.3 Vp-p, 75 (burst level)
(DSR-85P)
Appendix
(75%)
79