Sony 85P Operating Instructions Manual page 52

Changing Menu Settings
4
Press the ÷ button.
This displays the menu level 2 for the menu item
selected in step 3.
Example: Level-2 display for "DISPLAY CONTROL"
SETUP MENU
DISPLAY CONTROL
CHARA.DISPLAY :ON
CHARA.POSITION
CHARA.TYPE :WHITE
DISPLAY INFO :T&STA
SUB STATUS :OFF
MENU DISPLAY :WHITE
PEAK HOLD :OFF
OVER DISP HOLD :OFF
BRIGHTNESS :100%
ALARM :ON
Monitor screen
5
Press the ≥ or ˘ button to select the item whose
setting you wish to change.
For menu items with a level 3, press the ÷ button
to go to the level 3, then press the ≥ or ˘ button to
select the item whose setting you wish to change.
Example: Display when "BRIGHTNESS" is selected
SETUP MENU
DISPLAY CONTROL
CHARA.DISPLAY :ON
CHARA.POSITION
CHARA.TYPE :WHITE
DISPLAY INFO :T&STA
SUB STATUS :OFF
MENU DISPLAY :WHITE
PEAK HOLD :OFF
OVER DISP HOLD :OFF
BRIGHTNESS :100%
ALARM :ON
Monitor screen
6
Press the ÷ button.
This displays all possible settings for the item
selected in step 5.
SETUP MENU
DISPLAY CONTROL
BRIGHTNESS :100%
* 100%
66%
33%
Monitor screen
52
Chapter 4 Menu Settings
> Chara disp
Time counter display
Current settings
> Brightness
Time counter display
>> 100%
Time counter display
7
Press the ≥ or ˘ button to change the setting of
the item.
SETUP MENU
DISPLAY CONTROL
BRIGHTNESS :33%
* 100%
66%
33%
Monitor screen
8
To change other settings, press the ¿ button to
return to the previous screen, then repeat steps 5 to
7 as required.
9
When you have completed the settings, press the
SET (YES) button.
The message "NOW SAVING..." appears on the
monitor screen, and "Saving..." appears in the time
counter display, while the new settings are saved in
the unit's memory.
When the saving operation is completed, the
monitor screen and time counter display return to
their normal indications.
Notes
• If you power off the unit before setting operation
is completed, settings will be lost. Wait until the
saving is completed before powering off the unit.
• If instead of pressing the SET (YES) button you
press the MENU button, the new settings are not
saved. The message "ABORT !" appears both on
the monitor screen and in the time counter display
for 0.5 seconds, and the system forcibly exits the
menus. To change more than one setting, be sure
after making the settings to press the SET (YES)
button.
>> 33%
Time counter display