Sony CAV-M1000ES Installation Manual page 18

Hooking up the Main Unit
Output component hookups
AUDIO OUT jack (F)
Hook up the AUDIO OUT jack of each SOURCE
connection jack of the Main Unit and each audio input of
the external A/V receiver.
Use RCA audio cables.
VIDEO OUT jack (G)
Hook up the VIDEO OUT jack of each SOURCE
connection jack of the Main Unit and each video input of
the external A/V receiver.
Use RCA video cables.
IR OUT COMMON jack (H)
Plug the IR emitter into the IR OUT COMMON jack of the
Main Unit.
The IR control signal will be routed to the output
component (an auxiliary device that are not source
specific). Find the IR sensor window on the output
component and attach the IR emitter to the component
sensor.
Zone related cables hookups
SPEAKERS jack (I)
Hook up the SPEAKERS jack of each ZONE connection
jack of the Main Unit and the FROM AMPLIFIER jack of
each Keypad.
Use speaker cords terminated with plug-in 4-terminal
screw-type connectors.
Leave the AC power cord unplugged when you hook up
speaker cords.
VIDEO OUT jack (J)
Hook up the VIDEO OUT jack of each ZONE connection
jack of the Main Unit and the video input of the TV
monitor in each zone.
Use an RCA video cable.
KEYPAD jack (K)
Hook up the KEYPAD jack of each ZONE connection jack
of the Main Unit and the IN jack of each Keypad.
Use a CAT5 cable.
12 V TRIGGER jack (L)
Hook up the 12 V TRIGGER jack of the Main Unit and
the device used to drive a voltage sensing relay module
and an AC strip.
Use a 3.5 mm monaural mini plug cord.
18 US
RF Antenna hookup (M)
Hook up the ANTENNA jack of the Main Unit and the
jack of the RF Antenna.
Use a shielded CAT5 cable less than 50 feet in length.
Main Unit
AC power cord hookup (N)
Connect the supplied AC power cord to the AC IN jack.
50 feet max.
RF Antenna