Communication Detail Settings - Mitsubishi Electric GOT2000 Series Connection Manual

■2. Communication detail settings
Make the settings according to the usage environment.
(For FUJI MICREX-F)
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Retry
Timeout Time
Host Address
Delay Time
4 - 20
4.2 Serial connection
Set this item when change the transmission speed used for communication
with the connected equipment. (Default: 9600bps)
Set this item when change the data length used for communication with the
connected equipment.
(Default: 8bits)
Specify the stop bit length for communications. (Default: 1bit)
Specify whether or not to perform a parity check, and how it is performed
during communication.
(Default: Even)
Set the number of retries to be performed when a communication error
occurs. (Default: 0time)
Set the time period for a communication to time out.
(Default: 3sec)
Specify the host address (station No. of the GOT to which the PLC is
connected) in the connected network.
(Default: 0)
Set this item to adjust the transmission timing of the communication request
from the GOT. (Default: 5ms)
Description Range
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
7bits/8bits
1bit/2bits
None
Even
Odd
0 to 5times
1 to 30sec
0 to 99
0 to 300ms