Table of Contents
Advertisement
Rear
A PARALLEL DATA (IEEE1284) connector
(Amphenol 36-pin) (10)
Used to connect a Windows computer via the
parallel interface, using the parallel interface cable.
(not supplied)
B Ventilation holes (8, 19)
Provided to prevent the printer from overheating.
Cover these holes with the fan cover and filter
supplied, as required, to prevent the printer from
becoming clogged with dust.
C
Equipotential ground terminal
Used to connect to the equipotential plug to bring
the various parts of a system to the same potential.
See "Important safeguards/notices for use in the
medical environments" on page 2.
D DIP switches (9)
Used to set the SCSI ID number and the built-in
terminator to ON or OFF.
E SCSI connectors (Half pitch 50-pin) (10)
Used to connect a Windows or Macintosh computer
or another SCSI device, through a SCSI cable (not
supplied). The other connector is a loop-through
connector. If one of the two connectors is not being
used, set the terminator of the DIP switch to ON.
See "Setting the DIP Switches" on page 9.
F - AC IN connector (9, 10)
Used to connect the unit to a wall outlet, using the
AC power cord.
Location and Function of Parts and Controls
7
Advertisement
Table of Contents
