Location And Function Of Parts And Controls; Front - Sony UP-D71XR Instructions For Use Manual

Location and Function
of Parts and Controls
For details, refer to the pages indicated in parentheses.

Front

A Printer window display (12, 14, 15, 16, 18)
Displays status messages. When setting the print
quantity, the PRINT QTY (print quantity setting)
menu is displayed. For menu-based operations, the
GRAPHICS (printout adjust) menu, MARGIN
PRINT (margin print setting) menu or MIRROR
menu is displayed here.
Also, you can clean the thermal head following the
instruction message displayed here.
If an error occurs, a corresponding error message is
displayed.
B ALARM indicator (20)
Lights in orange when the print paper supply is
exhausted, the paper jams, or another problem
occurs.
C MENU button (15, 16, 18)
Press this button to display or close the
GRAPHICS, MARGIN PRINT or MIRROR menu.
Also, press this button when cleaning the thermal
head.
D PRINT QTY (print quantity setting) button (14)
Press this button to display or close the print
quantity setting menu in the printer window
display.
6

Location and Function of Parts and Controls

E G, g, F, f (Cursor control) buttons (14, 15, 16,
18)
Use these buttons to increase or decrease a value or
level shown on the menu, or to scroll up and down
through a menu.
F STOP button (13, 18)
Press this button to stop printing part-way through
a printer job.
G
PRINT button (12)
Press this button to print the image data stored in
the memory of the printer.
H ! POWER switch (12, 18)
Press to turn the printer on or off.
I EJECT TRAY button (11, 21)
Press this button to eject the paper tray.
J Paper output slot (11, 21)
Printed pages (or printouts) are ejected here.
K Paper tray (11, 21)
Load paper into this tray. Also, ejected printed
pages are accumulated on the cover of this tray.
L Remaining paper confirmation window
You can confirm the amount of paper remaining in
the paper tray here.
M Maintenance door (18)
Open this door when cleaning the thermal head.