CHAPTER 3 PROGRAMMING PATTERNS
Modifying a part of pattern
The part of the programmed pattern is changed.
The following describes how to modify 5, 6 and 7 to 5', 6' and 7'.
1. Carry out step 8 in "Programming procedure" (page
20).
2. Touch
.
3. Touch
.
4. Touch
to select "Range select".
5. Use
to move the cursor
*You can move the cursor according to the skipping
units.
* You can move the cursor continuously by holding
down the key.
6. Press
.
62
7. Use
8. Press
9. Use the jog key to move the cursor
7'.
10. Press
The sewing points will move to the 5', 6' and 7'
positions.
to 5.
11. Carry out steps 6 and 7 in "Programming procedure"
(page 19, 20).
BAS H series, Programmer
to move the cursor
points 5 to 7 will all now be selected.
.
.
to 7. Sewing
to 5', 6' and