Figure 4.3
in engineering units (Y) that have been entered into a linearisation table. They would pro-
duce the following curve.
A straight line is drawn between each point, as shown by the continuous (red) line in
4.3. For a more accurate curve, as shown by the dotted line (blue), add more data points
into the linearisation table.
The Linearization tables that you set up here can then be used in the
on page 52
60
Linearisation Table examples
shows an example of a set of non linear signal inputs (X) and the required values
Figure 4.3 Example of a 0-10V non-linear input signal
10
6
Y
(Eng. Units)
0
Power up
8
4
2
0
2
4
X
( Signal Input)
6
8
10
"Analogue In Menu"
43-TV-25-35 GLO Iss.4 Dec 06 UK
Figure
A5E01001767-04