Table of Contents
Advertisement
Firmware option
OPC
Extra Pens (4 pens)
Notes for
* Basic maths is standard in all recorders. Basic Maths math comprises of: Add, Subtract, Multiply and Divide
(1) Additional pens ("Extra Pens") can be used to display and store the results of calculations, totalisers, variables
imported via communications, or to store values.
(2) Custom Screens must be built using SIREC D Screen Designer (.lay). Screens from other Screen Designer ver-
sions cannot be imported (.lyt). (not available for the SIREC D200).
(3) Event markers are required to automatically reset the totalisers, for example on a periodic basis or on an exter-
nal condition. (Not necessary if the totalisers are reset manually)
(4) Not available for the
Credits can be applied to the Firmware functions until the total number of credits purchased
has been used up.
Additional credits can be purchased later if new features are to be activated and not enough
credits are available to support these additional functions
Firmware Options
Full Maths and Full Math with Scripting
(Scripting is not available for the SIREC D200).
See "Appendix B: Maths Expressions" on page 233.
Applying your Firmware credits
To activate the Firmware options follow this file path.
Main Menu > Configue > Setup > Edit > General > Factory > Credits
The Credit menu contains the Serial No. of the recorder, how may credits are available, dis-
plays the Options Code and lists what firmware Options are currently active.
168
Firmware Credit System
Table 7.1 : Firmware Options
Credit
value
8
OPC Server (Open Process Control) - Software application for realtime interfacing between serv-
ers and clients. OPC is a software standard that defines common interfaces for data exchange
between devices such as recorders, controllers, PCL's and Windows™ based applications
2
4 extra pens to store and display totalised values, results of calculations, etc. Maximum is up to
16 extra pens for the SIREC D300, 12 extra pens for the SIREC D200 recorders, and 48 extra
pens for the SIREC D400 recorder.
Table 7.1 on page 167
See "Applying your Firmware credits" on page 168.
• Serial No. - read only and cannot be edited.
• Credits - read only and cannot be edited. It displays the number of Credits available to
activate additional firmware functionality including the total credit value.
• Options Code - the Options code is a unique coded number for this recorder that contains
information that enables certain functionality including credit value.
• Options - Select the Options button
• This displays how may credits are currently in use.
Description
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
