Table of Contents
Advertisement
Thermocouples
Ensure polarity of thermocouple is correct.
Resistance Thermometers
If using 2 wire R/T the + and - terminals must be linked together.
page 19.
Analogue Input Signal Wiring
This Analogue Input card can be used as an option to add up to 6 more Analogue Input
channels for the SIREC D200
numbers 9 to 14. The standard fit Analogue Input card is fitted in slot A with up to 6 channels
(channels numbers 1 to 6).
To fit this option card into the SIREC D200 recorder you will require an expansion card to
interface to the recorder.
page 19.
18
Electrical Installation
CAUTION
CONTROL UNIT DAMAGE
Do not apply a hazardous live voltage between + and - pins within a channel. (eg. 60V
maximum on voltage ranges, 5V maximum on millivolts ranges). Do not apply a voltage
above 1.2V to the * pin.
Failure to comply with these instructions may result in product damage
Figure 2.6 Analogue Input connector
CH1
CH2
CH3
CJC
CH4
CH5
This will fit into Slot B and will display as channel
recorder.
See "SIREC D200 Analogue Input (Standard) card" on
See Figure 2.7 on
CH6
CH7
CH8
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
