Sony MDR IF8000 Operating Instructions

Cordless Stereo
Headphones
Operating Instructions
Mode d'emploi
Manual de instrucciones
MDR-IF8000
Sony Corporation © 2001 Printed in Korea
You are cautioned that any changes or modifications
English
not expressly approved in this manual could void
your authority to operate this equipment.
RECYCLING NICKEL METAL HYDRIDE
WARNING
BATTERIES
To prevent fire or shock hazard, do not
Nickel Metal Hydride batteries
expose the unit to rain or moisture.
are recyclable.
You can help preserve our
To prevent fire or shock hazard, do not place objects
environment by returning your
filled with liquids, such as vases, on the apparatus.
used rechargeable batteries to
the collection and recycling
To avoid electrical shock, do not open the cabinet.
location nearest you.
Refer servicing to qualified personnel only.
For more information regarding recycling of
For the customers in the U.S.A.
rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Owner's Record
The model number is located on the right inner side of Caution:
the headband. The serial number is located at the Do not handle damaged or leaking Nickel Metal
inner side of the battery compartment. Hydride batteries.
Record these numbers in the spaces provided below.
Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. MDR-IF8000 Welcome!
Serial No.
Thank you for purchasing the Sony
MDR-IF8000 Cordless Stereo Headphones. Before
NOTICE FOR THE CUSTOMERS IN THE U.S.A.
operating the unit, please read this manual
thoroughly and retain it for future reference.
NOTE Some features are:
• Cordless headphones using a digital infrared
This equipment has been tested and found to comply
transmission system which provides the same sound
with the limits for a Class B digital device, pursuant to
quality as compact discs, resistant to external noise
Part 15 of the FCC Rules. These limits are designed to
and interference. (uncompressed transmission)
provide reasonable protection against harmful
• Equipped with the head tracking system in the
interference in a residential installation. This
headphones to create more realistic sound.
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in • Self-adjusting mechanism eliminating the need for
headband adjustment.
accordance with the instructions, may cause harmful
• Auto Power On/Off Function to automatically turn
interference to radio communications. However, there
on the headphones when they are put on and to turn
is no guarantee that interference will not occur in a
them off when they are taken off.
particular installation. If this equipment does cause
• VOL control for adjusting both the right and left
harmful interference to radio or television reception,
volume of the headphones.
which can be determined by turning the equipment
• Rechargeable nickel-metal hydride batteries
off and on, the user is encouraged to try to correct the
(supplied and sold separately) or R6 (size AA)
interference by one or more of the following
alkaline batteries (sold separately) can be used to
measures:
power the headphones.
– Reorient or relocate the receiving antenna.
Overview
– Increase the separation between the equipment and
receiver. The MDR-DS8000 is a digital surround headphone
– Connect the equipment into an outlet on a circuit system using digital infrared transmission.
different from that to which the receiver is You can enjoy multichannel surround sound with
connected. headphones by simply connecting the digital
– Consult the dealer or an experienced radio/TV surround processor to a DVD player or a Digital TV, a
technician for help. Digital Broadcasting Satellite Receiver, etc., with the
supplied optical digital connecting cable.
The Separately sold processor is necessary
3-238-078-12(1) Listening to a
The headphones cannot be used alone.
Use the separately sold Sony Digital Surround
programme
Headphone System MDR-DS8000.
If you use the MDR-DS8000, read the manual for the
The validity of the CE marking is restricted to only
MDR-DS8000 too.
those countries where it is legally enforced, mainly in
the countries EEA (European Economic Area).
1
Setting up the
2
headphones
3
The supplied rechargeable batteries should be charged
before using them for the first time.
Please refer to the manual of MDR-DS8000 for more
details.
1
Open the battery compartment lid on top of
the left housing.
4
2
Insert two R6 (size AA) batteries.
5
Insert the #
side first
3
Close the battery compartment lid.
Face the source (for example, your TV) and switch the
HEAD TRACKING switch to ON. Wait for 2 seconds
without moving.
Do not move your head until the head tracking system
is stabilized. No sound is output for this period.
After the head tracking system stabilizes, playback
sound can be heard. After this, even if you turn your
head in any direction, the sound will be heard as if
from the front.
Notes
• Always wear the headphones vertically so that
• Whenever the HEAD TRACKING switch is set
Battery life
Battery Type Usage time
Sony R6(size AA) rechargeable Approx. 7 hours *
nickel-metal hydride batteries (when fully • If the sound from the headphones (while facing
(NH-AA: supplied) charged)
*
Sony alkaline battery LR6 (SG) Approx. 7 hours
* Usage time stated above may vary according to the
temperature or conditions of use.
The headphones automatically turn off
Note
when they are taken off
Manganese batteries cannot be used with this unit.
— Auto Power On/Off Function
When not in use, be careful not to hang the
When to replace the battery
headphones in such a way as to activate the Auto
Replace the batteries with new ones when the
Power On function, as this will consume battery
POWER indicator on the right side of the headphones
power.
dims, or distortion occurs and hissing noise increases.
If the battery compartment lid comes off
the headphones
As shown in the illustration, align A with A, and B
with B, reattach, and then slide the cover in place.
To check the remaining battery power
Pull up the self-adjusting band and check the POWER
indicator. The batteries are still serviceable when the
POWER indicator lights red.
Charge the rechargeable batteries or use new alkaline
batteries if the POWER indicator flashes and an
intermittent beep sound is heard from the
headphones.
If no sound is heard from the headphones
A short beep sound is heard repeatedly and the
Muting Function is automatically activated if the
sound output from the headphones is cut off when the
headphones are outside the infrared transmission
area, or when the infrared signals are interrupted. The
Muting Function is automatically cancelled when you
get closer to the processor or there is no longer
anything in the way of the infrared signals.
Precautions
On safety
• Do not drop, hit, or otherwise expose the processor
or headphones to strong shocks of any kind. This
could damage the product.
• Do not disassemble or attempt to open any parts
Turn on the component connected to the
of the system.
processor.
Do not place the system in any of the
Press POWER to turn on the processor.
following locations.
• Location exposed to direct sunlight, near a heater, or
Put on the headphones.
other extremely high-temperature location
The POWER indicator lights red, and the
• Bathroom or other high-humidity locations
headphones automatically turn on.
On headphones
Act considerately
When the volume is too high, the sound leaks
POWER
outside the headphones. Be careful not to raise the
indicator
volume too high that it bothers people around you.
There is a tendency to raise the volume when
using in noisy places. However, the volume should
be kept at a level where you can respond when
Infrared rays receptor called while listening to the headphones.
On ear pads
Adjust the volume.
The ear pads are replaceable. Replace them when
they are worn out. To replace the ear pads, consult
your nearest Sony dealer.
Raise the
volume
Lower the
Troubleshooting
volume
Check and try the suggestions below before you bring
Set the head tracking function to ON.
your headphones to a repair service. Should any
(When the output mode of the processor is
problem persist, consult your nearest Sony dealer.
set to "VIRTUAL FRONT" or "VIRTUAL
SURROUND") No sound
, Check the connection between the processor
and the AV component.
, Turn on the AV component connected to the
processor, and start the programme (playback).
, If you connect the processor to an AV
component using the headphone jacks, raise
the volume level on the connected AV
component.
, Raise the headphone volume.
, The batteries of the headphones are completely
exhausted.
• Pull up the self-adjusting band and if the
POWER indicator is turned off, charge the
rechargeable batteries or replace the alkaline
batteries. If the POWER indicator is still
turned off, take the unit to your nearest Sony
dealer.
, The head tracking function does not work
correctly.
• When the HEAD TRACKING switch is set to
ON after putting the headphones on your
the head tracking system will be stable. head, or when you put them on with the
HEAD TRACKING switch ON, wait for 2
seconds without moving your head. If you
to ON, and whenever you put on the
hear no sound even after trying this, take off
headphones with its power on, always wait for 2
the headphones and then, put them on again.
seconds without moving your head as the head
tracking system newly stabilizes each time.
Distorted sound
, If you connect the processor to an AV
your TV) seems to be different from the
component using the headphone jacks, lower
actual direction of your TV, face forwards and the volume level on the connected AV
press the RESET button on the headphones. component.
Low sound
, If you connect the processor to an AV
component using the headphone jacks, raise
the volume level on the connected AV
component.
, Raise the headphone volume.
Short beep sound is heard.
, The headphones cannot receive infrared rays
Self-adjusting band
from the processor.
• Turn on the processor.
• Check the connection between the processor
and the AC power adaptor, between the AC
power adaptor and the AC power socket.
• Check if there is an obstacle between the
processor and the headphones.
• Use the headphones nearer to the processor.
• Change the position or angle of the processor.
• Check if your hand or hair covers the
infrared signal sensor of the headphones.
• If you use the headphones near a window
exposed to direct sunlight, draw a curtain or a
blind to block the sunlight. Or use the
headphones where you are not exposed to the
direct sunlight.
• If you use the headphones near a plasma
display panel, move away from it.
Long beep sound is heard.
, The batteries of the headphones are exhausted.
Pull up the self-adjusting band and if the
POWER indicator is flashing, charge the
rechargeable batteries or replace the alkaline
batteries. If the POWER indicator is still
flashing and beep sound is still heard, take the
unit to your nearest Sony dealer.
The sound from the headphones seems to
be different from the actual direction of
your TV.
, Face forward (e.g.to your TV) and press the
RESET button on the headphones.
Français
Specifications
General
Modulation System
AVERTISSEMENT
DQPSK
Secondary carrier wave frequency
Afin d'éviter tout risque d'incendie ou
4.5 MHz
d'électrocution, ne pas exposer cet
Playback frequency range
12 – 24,000 Hz appareil à la pluie ou à l'humidité.
Power requirements
Rechargeable nickel-metal hydride Pour éviter tout risque d'incendie ou d'électrocution,
batteries (supplied or sold separately) or
ne posez pas de récipients remplis d'eau (p. ex. des
R6 (size AA) alkaline batteries
vases) sur l'appareil.
Mass Approx. 350 g (10 oz) (including the
supplied rechargeable nickel-metal
Afin d'écarter tout risque d'électrocution, ne pas
hydride batteries)
ouvrir le boîtier. Ne confier l'entretien de l'appareil
Supplied accessories
qu'à un personnel qualifié.
Rechargeable nickel-metal hydride batteries
NH-AA(1,700 mAh) (2)
RECYCLAGE DES ACCUMULATEURS À
Operating Instructions (1)
HYDRURE MÉTALLIQUE DE NICKEL
Design and specifications are subject to change
Les accumulateurs à hydrure
without notice.
métallique de nickel sont
recyclables.
Vous pouvez contribuer à
préserver l'environnement en
rapportant les piles usées dans
un point de collection et
recyclage le plus proche.
Pour plus d'informations sur le recyclage des
accumulateurs, téléphonez
le numéro gratuit 1-800-822-8837 (Etats-Unis et Canada
uniquement), ou visitez http://www.rbrc.org/
Avertissment:
Ne pas utilliser des accumulateurs à hydrure
métallique de nickel qui sont endommagées ou qui
fuient.
Bienvenue!
Nous vous félicitons pour l'achat de ce casque stéréo à
infrarouges Sony MDR-IF8000. Avant la mise en
service de cet appareil, prière de lire attentivement ce
mode d'emploi et de le conserver pour toute référence
ultérieure.
Cet appareil offre, entre autres, les fonctions
suivantes:
• Casque d'écoute sans fil utilisant un système de
transmission numérique à infrarouges dont la
qualité sonore égale celle des disques compacts. Ce
casque isole des bruits extérieurs et des interférences
(transmission non compressée).
• Afin d'offrir un son plus réaliste, un système de
détection des mouvements de la tête est intégré au
casque.
• Mécanisme auto-ajustable qui évite à l'utilisateur
d'avoir à régler la taille du serre-tête.
• Fonction de mise sous tension et hors tension
automatique : le casque se met automatiquement
sous tension lorsqu'il est posé sur la tête et hors
tension lorsqu'il est retiré.
• Bouton VOL permettant de régler le volume droit et
gauche du casque.
• Casque d'écoute alimenté avec des piles
rechargeables nickel-hydrure métallique (fournies et
vendues séparément) ou des piles alcalines R6 de
taille AA (vendues séparément).
Aperçu
Le MDR-DS8000 est un système de casque d'écoute
ambiophonique numérique utilisant la transmission
infrarouges numérique.
Vous pouvez profiter des avantages d'un son
ambiophonique multicanal (le son "surround") avec
ce casque d'écoute en raccordant tout simplement le
processeur ambiophonique numérique sur un lecteur
de DVD, un téléviseur numérique, un récepteur de
diffusion numérique par satellite, etc., à l'aide du
câble de raccordement numérique optique fourni.
Le processeur vendu séparément est
nécessaire
Le casque ne peut pas être utilisé seul.
Utilisez le système de casque ambiophonique
numérique Sony MDR-DS8000 vendu séparément.
La validité du marquage CE est limitée uniquement
aux pays dans lesquels il fait force de loi, c'est-à-dire
principalement dans les pays de I'EEE (Espace
économique européen).
Préparation du casque
Les piles rechargeables fournies doivent être chargées
avant leur première utilisation.
Veuillez vous reporter au mode d'emploi du MDR-
DS8000 pour obtenir plus d'informations.
1
Ouvrez le couvercle du logement des piles
sur le haut du boîtier gauche.
2
Insérez deux piles R6 (format AA).
Commencez
par insérer
le côté #
3
Fermez le couvercle du logement des piles.
Durée d'utilisation des piles
Type de pile Durée d'utilisation
Piles rechargeables au Environ 7 heures*
nickel-hydrure métallique (complètement chargées)
Sony R6 de format AA
(batteries NH-AA: fournies)
Pile alcaline LR6 (SG) de Sony Environ 7 heures*
* La durée d'utilisation indiquée ci-dessus peut varier
selon la température ou les autres conditions
d'utilisation.
Remarque
N'utilisez pas de piles au manganèse dans cet
appareil.
Remplacement des piles
Remplacez les piles par des piles neuves lorsque le
témoin POWER sur la droite du casque devient
sombre ou lorsque vous constatez des distorsions et
que et le sifflement augmente.
Réinstallation du couvercle du logement
des piles si celui-ci se détache
Comme indiqué sur le schéma ci-dessous, alignez A
avec A et B avec B, refixez puis faites glisser le
couvercle pour le remettre en place.
(Suite au verso m)