Panasonic Attune WX-C3010 Installation Instructions Manual page 9

1. Power ON/OFF Switch
This switch turns the power of the center module on and
off.
[COMMUNICATION INDICATORS]
2. Power Indicator (Green) (POWER)
This indicates that the power of center module is on.
3. Talk/Gooseneck Microphone/Indicator (Yellow)
(TALK)
This lights up during conversation with customers.
4. Page Indicator (Green) (PAGE)
This lights up during conversation among store
personnel.
5. Vehicle Detector Indicator (Yellow)(VEHICLE
DETECTOR)
This lights up when the Vehicle Detector senses a
vehicle. The indicator blinks while the speed team mode
is active.
[CONTROL INDICATORS]
6. Telephone Indicator (Green) (TELEPHONE)
When the Order Taker or the All-in-One Headset is set in
the manager mode and the Optional Function Button [R]
is pressed on the Order Taker or All-in-One Headset
side, operation cannot be forwarded for talking or
paging. At that time, this indicator lights-up. When the
Optional Function Button is pressed on the Order Taker
or All-in-One Headset side again, the talk or page
operation is recovered. The Telephone Indicator is
turned OFF.
7. Control Output Indicator (Green) (CONTROL OUT)
This indicator lights while the external control.
[VOLUME CONTROLS]
8. Outside Speaker Volume (OUTSIDE, SP)
This control sets output volume level of the outside
speaker.
9. Outside Microphone Volume (OUTSIDE, MIC)
This control sets the input level of outside microphone
from the customer.
10. Auxiliary Speaker Volume (AUX, SP)
This control sets the output level of auxiliary speaker.
11. Auxiliary Microphone Volume (AUX, MIC)
This control sets the input level of gooseneck
microphone.
12. Vehicle Detector Beep Volume (BEEP)
This control sets the vehicle detection beep tone for the
Order Taker or the All-in-One Headset.
13. POS Audio Volume (POS AUDIO)
This control sets the input level of POS audio.