Panasonic Attune WX-C3010 Installation Instructions Manual page 10

[OPERATIONAL SETTING]
14.Speed Team Indicator (yellow) (SPEED TEAM)
This indicates that the speed team mode is on.
15.Speed Team On/Off Button
This button turns the speed team mode on and off.
16.Vehicle Detector Beep Day/Night Indicator (yellow)
(BEEP DAY/NIGHT ON: DAY)
This indicates that the vehicle detector beep has selected
DAY.
17.Vehicle Detector Beep Day/Night Button
This button turns the vehicle detector beep DAY and
NIGHT.
Day mode : Disables the vehicle detector beep on the
other lane.
Night mode: Reduces the volume of the vehicle detector
beep on the other lane.
18.Outside Speaker Level Indicator (yellow) (OUTSIDE
SP LEVEL ON: DAY)
This indicates that the outside speaker level has selected
normal level.
19.Outside Speaker Level DAY/NIGHT Button
This button turns the outside speaker level normal level
and 50% level.
20.Vehicle Detector Normal/Override On Indicator
(yellow)(V/DET OVERRIDE)
This indicates that the vehicle detector has selected
Override On.
21.Vehicle Detector Normal/Override On Button
This button turns the vehicle detector Normal and
Override On.
NORMAL : The vehicle detector turns on only when
vehicle is detected at the menu board.
22.Talk/Page Release Button (T/P RELEASE)
The button is used to release temporarily the talk/page
communication of the Order Taker or All-in-One Headset.
[GREETER]
23.Greeter On/Off Indicator (yellow) (GREETER, ON)
This indicates that the greeter function has selected on.
24.Greeter On/Off Button (GREETER, ON)
This button turns the greeter function on and off.
25.Greeter Memory Select and Output Level Indicator
(green/yellow/red) (SELECT)
This indicates that the greeter memory has been selected.
Each memory has a capacity to record a message for 16
seconds at the maximum.
1: This indicates that the greeter memory has selected 1.
(The message of "Please pull forward" is a factory default.)
2: This indicates that the greeter memory has selected 2.
Off: Greeter is Off.
Green: When the greeter output level set in LOW, the
indicator lights up in green.
Yellow: When the greeter output level set in MID, the
indicator lights up in yellow.
Red: When the greeter output level set in HIGH, the
indicator lights up in red.
26.Greeter Memory Select Button (SELECT)
This button selects either of the greeter memories.