13
OPERATION PROFILE FUNCTION
13.1
Operation Profile Data
Waveform data used for control is collectively called operation profile data.
This section describes creating and using methods of operation profile data.
Operation profile data not only can be used in various functions (ex. cam of the single axis synchronous control), but also can
perform opening profile for the cam and reading/writing for the cam.
Specify the storage location to PROFILE_DATA.Location.
MC_CamTableSelect
MC_CamIn
Operation of this function for each system state
: Possible, : Not possible
System state
STOP
RUN
Moderate error
Major error
13 OPERATION PROFILE FUNCTION
372
13.1 Operation Profile Data
Cam
Standard text method
csv format
zip format
Execute every instruction
Assign ID that can be specified
by control instruction.
PROFILE_ID type
Execute every control instruction
Operation possibility
MCv_ProfileSelect
MCv_ProfileCalc