Sony SDM-X93 Operating Instructions (primary manual) Operating Instructions Manual
Tft lcd color computer display
Hide thumbs
Also See for SDM-X93 Operating Instructions (primary manual):
- Owner's manual (377 pages) ,
- Manuel du propriétaire (25 pages) ,
- Quick setup manual (16 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sony SDM-X93 Operating Instructions (primary manual)
Summary of Contents for Sony SDM-X93 Operating Instructions (primary manual)
- Page 1 TFT LCD Color Computer Display SDM-X53 SDM-X73 SDM-X93 © 2003 Sony Corporation...
- Page 2 Para prevenir cualquier mal funcionamiento y evitar daños, por favor, lea detalladamente este manual de instrucciones antes de conectar y operar este equipo. If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/ Declaration of Conformity...
- Page 3 Para prevenir cualquier mal funcionamiento y evitar daños, por favor, lea detalladamente este manual de instrucciones antes de conectar y operar este equipo. If you have any questions about this product, you may call; Sony Customer Information Services Center 1-800-222-7669 or http://www.sony.com/ Declaration of Conformity...
-
Page 4: Table Of Contents
Precautions ......... . . 4 Identifying parts and controls . -
Page 5: Precautions
Precautions Warning on power connections • Use the supplied power cord. If you use a different power cord, be sure that it is compatible with your local power supply. For the customers in the U.S.A. If you do not use the appropriate cord, this monitor will not conform to mandatory FCC standards. -
Page 6: Identifying Parts And Controls
Identifying parts and controls See the pages in parentheses for further details. Front of the LCD display Side view of the LCD display MAIN POWER Rear of the display stand MENU A 1 (Power) switch and 1 (power) indicator (pages 9, 18, 23) This switch turns the monitor on when the 1 (power) indicator lights up in red. - Page 7 Rear of the LCD display SDM-X73/X93 INPUT 1 INPUT 2 SDM-X53 INPUT 1 L AC IN connector (page 8) This connector connects the power cord (supplied). M Security Lock Hole The security lock hole should be used with the Kensington Micro Saver Security System.
-
Page 8: Setup
Setup Before using your monitor, check that the following items are included in your carton: • LCD display • Power cord • HD15-HD15 video signal cable (analog RGB) • DVI-D video signal cable (digital RGB) • Audio cord (stereo miniplug) •... -
Page 9: Setup 2: Connect The Audio Cord
x Connecting to a Macintosh to the HD 15 input connector (analog RGB) to the computer’s output connector HD15-HD15 video signal cable (analog RGB) (supplied) Macintosh When connecting a Macintosh computer, use an adapter (not supplied), if necessary. Connect the adapter to the computer before connecting the video signal cable. -
Page 10: Setup 4: Bundle The Cords And Cables
Setup 4: Bundle the cords and cables 1 Slide up the back cover. 2 Secure the video signal cable, audio cords and the power cord using the cable holder on the cabinet. 3 Slide down the back cover. 4 Bundle all the cords and cables through the cable holder of the stand. -
Page 11: Setup 6: Adjust The Height And Tilt
If no picture appears on your screen • Check that the power cord and the video signal cable are properly connected. • If “NO INPUT SIGNAL” appears on the screen: – The computer is in the power saving mode. Try pressing any key on the keyboard or moving the mouse. -
Page 12: Selecting The Input Signal (Input Button)
Selecting the input signal (INPUT button) Press the INPUT button. The input signal change each time you press this button. INPUT SDM-X53 On-screen message Input signal configuration (Appears about 5 seconds on the upper left corner.) INPUT1 : HD15 HD15 input connector (analog RGB) for INPUT1 INPUT2 : DVI-D DVI-D input connector... -
Page 13: Customizing Your Monitor
Customizing Your Monitor Before making adjustments Connect the monitor and the computer, and turn them on. For the best results, wait for at least 30 minutes before making adjustments. You can make numerous adjustments to your monitor using the on-screen menu. Navigating the menu 1 Display the main menu. -
Page 14: Picture Adjust Menu
PICTURE ADJUST menu You can adjust the following items using the PICTURE ADJUST menu. • MODE (ECO mode) P C T U R E A D J U S T • BACKLIGHT H I G H • CONTRAST 6 • BRIGHTNESS •... -
Page 15: Screen Menu (Analog Rgb Signal Only)
3 Press the m/M buttons to select “0 RESET” and press the OK button. The “RESET” menu appears on the screen. 4 Press the m/M buttons to select the desired mode and press the OK button. • OK: To reset all of the adjustment data in the PICTURE ADJUST menu to the default settings. -
Page 16: Color Menu
Adjust so that the horizontal stripes are at a minimum. 8 Press the OK button. The main menu appears on the screen. If vertical stripes are observed over the entire screen, adjust the pitch using the following procedures. 9 Press the m/M buttons to select “PITCH” and press the OK button. -
Page 17: Gamma Menu
GAMMA menu You can associate the picture’s color shade on the screen with the picture’s original color shade. GAMMA GAMMA 1 GAMMA 2 GAMMA 3 1 2 8 0 1 0 2 4 6 0 H z E X I T x Selecting the GAMMA 1 Press the MENU button. -
Page 18: Language Menu
LANGUAGE menu L A N G UA G E E N G L I S H F R A N Ç A I S D E U T S C H E S P A Ñ O L I T A L I A N O 1 2 8 0 1 0 2 4 6 0 H z... -
Page 19: Technical Features
Technical Features Controlling the volume Using the monitor’s speakers or headphones, you can listen to sound from your computer or other audio equipment connected to the monitor’s audio input jacks. You can control the volume by using a separate “Volume” menu from the main menu. -
Page 20: Reducing The Power Consumption (Eco Mode)
Reducing the power consumption (ECO mode) If you press the ECO button on the front of the monitor repeatedly, you can select the screen brightness from HIGH t MIDDLE t LOW, and the power consumption is reduced. When you select “AUTO,” the monitor automatically adjusts the screen brightness according to the brightness of the surroundings (Automatic brightness adjustment function). -
Page 21: Troubleshooting
Troubleshooting Before contacting technical support, refer to this section. On-screen messages If there is something wrong with the input signal, one of the following messages appears on the screen. To solve the problem, see “Trouble symptoms and remedies” on page 21. If “OUT OF RANGE”... -
Page 22: Trouble Symptoms And Remedies
If a problem occurs as a result of a connected computer or other equipment, refer to the connected computer/equipment’s instruction manual. Use the self-diagnosis function (page 23) if the following recommendations do not resolve the problem. For further information and troubleshooting assistance, please visit Sony support website at: Symptom... - Page 23 Symptom Picture flickers, bounces, oscillates, or is scrambled. Picture is fuzzy. Picture is ghosting. Picture is not centered or sized properly (analog RGB signal only). Picture is too small. Picture is dark. Wavy or elliptical pattern (moire) is visible. Color is not uniform. White does not look white.
-
Page 24: Self-Diagnosis Function
INFORMATION MODEL : SDM-X93 SER. NO : 1234567 MANUFACTURED : 2003-40 If any problem persists, call your authorized Sony dealer and give the following information: • Model name: SDM-X53, SDM-X73 or SDM-X93 • Serial number • Detailed description of the problem •... -
Page 25: Specifications
Specifications SDM-X53 LCD panel Panel type: a-Si TFT Active Matrix Picture size: 15 inch (38 cm) Input signal format RGB operating frequency* Horizontal: 28–61 kHz (analog RGB) 28–49 kHz (digital RGB) Vertical:48–75 Hz (analog RGB) 60 Hz (digital RGB) Resolution Horizontal: Max.1024 dots Vertical: Max.768 lines Input signal levels... -
Page 26: Environmental Requirements
TCO’99 Eco-document x Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.