Transition Module Preparation and
Installation
7.1
Overview
This chapter provides hardware preparation and installation instructions, as well as pin
assignment information for the CPCI-6020-MCPTM-01 transition module. The CPCI-6020-
MCPTM-01 is an optional module that is used in conjunction with the CPCI-6020 series of
Single Board Computers.
If you are using the CPCI-6020-MCPTM-01 with the CPCI-6020, ensure that you have
performed all tasks as described in
configuring and installing the CPCI-6020-MCPTM-01.
7.2
General Description
The CPCI-6020-MCPTM-01 provides additional I/O capabilities to the CPCI-6020 board. The
CPCI-6020-MCPTM-01 is installed directly in the CompactPCI backplane in the rear transition
board bay of the chassis and interfaces with the CPCI-6020 board through the J3 and J5
connectors.
It includes the following features:
Secondary EIDE interface via J5 user I/O connector
Dual 10BaseT/100BaseTX Ethernet capability
Two asynchronous serial ports (COM1-rear and COM2-optional to rear)
Two synchronous serial ports (COM3 and COM4)
One PMC I/O module (PIM)
Two Serial Interface Modules (SIMs)
One floppy disk port
One speaker port
One mouse and keyboard port
I/O signal multiplexing (IOMUX)
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 2, Hardware Preparation and
7
Installation, prior to
127