Checking The Display Indication - Sony Glasstron PLM-S700E Operating Instructions Manual

6
Adjust the brightness by turning the BRIGHT control.
7
Adjust the sound volume by turning the VOL control.
When you set AVLS in the menu to on, you cannot turn up the volume beyond the defined
limit (see page 37). If the audio input level is too high, the sound may be distorted. Turn
the volume down using the VOL control.
After you finish using the
Glasstron
Take off the Glasstron, and turn off the
power.
Note on the LCDs
The LCD screen is made with high-
precision technology. However, black
points or bright points of light (red, blue, or
green) may appear constantly on the LCD
screen. This is not malfunction.
(Effective dots: more than 99.999%)
BRIGHT
darker brighter
VOL
lower louder
Checking the display
indication
Press the jog dial while the picture is
displayed. The display indication appears
on the screen for five seconds.
To turn off the indication sooner, press the
jog dial again.
PC / RGB 800X600 60Hz
MEGA BASS 2
AVLS
* When using the AC power adapter, the
"
BRIGHTNESS
Remaining battery life*
(page 41)
" mark appears on the screen.
Input signal
(page 30)
MEGA BASS
(page 37)
AVLS
(page 37)
continued
31
-GB