Connecting The Power Source - Sony Glasstron PLM-S700E Operating Instructions Manual

Notes
• Even if you use the supplied audio/video
cable, the audio and video signals may not be
carried to the Glasstron depending on the
video source. In this case, contact your Sony
dealer or local authorised Sony service facility.

Connecting the power source

Connect the AC power adapter AC-PLM3 (supplied) to the DC IN connector on the power
supply box. Then, connect the Mains lead (supplied) to the AC power adapter and to a mains.
Do not connect the power source until all other connections are complete.
AC power adapter
AC-PLM3 (supplied)
to DC IN connector
Display unit
to mains
Mains lead (supplied)
DC IN 8.4V
• When you connect the Glasstron to the audio
output jacks (phono jacks) of your video
equipment, connect the Glasstron to both the
right and left audio output jacks. If you
connect the Glasstron to just one audio
output jack, you will hear sound from only
one of the stereo earphones.
Power supply box
19
-GB