Connecting The Video Equipment - Sony Glasstron PLM-S700E Operating Instructions Manual

Connecting the video equipment

Connect a VCR, laser disc player, DVD player, or camcorder to the power supply box using one
of the audio/video cables (supplied) as shown below. When you connect the Glasstron to the
video equipment, set the PC-VIDEO switch on the power supply box to "VIDEO."
Set the PC-VIDEO switch
to "VIDEO."
Power supply box
AUDIO / VIDEO
to AUDIO/VIDEO connector
: Signal flow
VCR, laser disc player, DVD player,
camcorder, etc.
Audio/video cable (supplied)
(special miniplug phono plug)
to audio/video output
Audio/video cable (supplied)
(special miniplug
to audio/video outputs
Video (yellow)
Audio L (white)
Audio R (red)
special miniplug)
Camcorder, etc.
continued
17
-GB