4
5
6
7
Product manual - IRB 8700
3HAC052853-001 Revision: F
Action
Remove the inspection plug.
Remove the protection cap from the nipple
of the oil filling plug and connect the oil
dispenser.
Refill the gearbox with oil, using the oil
dispenser.
Note
The amount of oil to be filled depends on
the amount previously being drained.
Inspect the oil level at the oil inspection
plug.
© Copyright 2015-2018 ABB. All rights reserved.
3.4.3 Changing oil in axis-2 and axis-3 gearbox
Note
xx1500001995
xx1500002014
Type of oil and total amount is detailed in
Technical reference manual - Lubrication
in gearboxes.
See
Type of lubrication in gearboxes on
page
140.
Required oil level is:
A few millimeters below the lower edge of
the inspection hole.
More information is found in
oil level in axis-2 and 3 gearboxes on
page
107.
xx1500001995
3 Maintenance
Continued
Inspecting the
Continues on next page
151