Kenwood TK-5810 Service Manual page 71

Item
Panel tuning mode
(P25) 1) Adj item: [SQOA]
Adjust: [✳✳✳]
2) Adj item:
[L]→[C]→[H]
SSG output: 12dB
SINAD level for
analog Wide
(MOD: 1kHz/±3kHz)
After input signal
from SSG, press
[PF5] key to store the
adjustment value.
5. Squelch 1) Adj item: [SQTW]
Tight Adjust: [✳✳✳]
(Wide) 2) Adj item:
[L]→[C]→[H]
SSG output: 12dB
SINAD level for
analog Wide +5dB
(MOD: 1kHz/±3kHz)
After input signal
from SSG, press
[PF5] key to store the
adjustment value.
(Narrow) 1) Adj item: [SQTN]
Adjust: [✳✳✳]
2) Adj item:
[L]→[C]→[H]
SSG output: 12dB
SINAD level for ana-
log Narrow +6.5dB
(MOD: 1kHz/±1.5kHz)
After input signal
from SSG, press
[PF5] key to store the
adjustment value.
6. RSSI (ref- 1) Adj item: [RRSIW]
erence) Adjust: [✳✳✳]
(Wide) 2) Adj item:
[L]→[C]→[H]
SSG output
: –125dBm (0.126µV)
(MOD: OFF)
After input signal
from SSG, press
[PF5] key to store the
adjustment value.
(Narrow) 1) Adj item: [RRSIN]
Adjust: [✳✳✳]
2) Adj item:
[L]→[C]→[H]
SSG output
: –125dBm (0.126µV)
(MOD: OFF)
After input signal
from SSG, press
[PF5] key to store the
adjustment value.
ADJUSTMENT
Condition
PC test mode
equipment
1) Adj item: [Squelch SSG
Open (P25)]
2) Adj item: [Low]→ AF VTVM
[Center]→[High] Oscillo-
SSG output: 12dB scope
SINAD level for
analog Wide
(MOD: 1kHz/±3kHz)
After input signal
from SSG, press [Ap-
ply] button to store
the adjustment value.
1) Adj item: [Squelch
Tight (Wide)]
2) Adj item: [Low]→
[Center]→[High]
SSG output: 12dB
SINAD level for
analog Wide +5dB
(MOD: 1kHz/±3kHz)
After input signal
from SSG, press [Ap-
ply] button to store
the adjustment value.
1) Adj item: [Squelch
Tight (Narrow)]
2) Adj item: [Low]→
[Center]→[High]
SSG output: 12dB
SINAD level for ana-
log Narrow +6.5dB
(MOD: 1kHz/±1.5kHz)
After input signal
from SSG, press [Ap-
ply] button to store
the adjustment value.
1) Adj item: [RSSI
(Reference) (Wide)]
2) Adj item: [Low]→
[Center]→[High]
SSG output
: –125dBm (0.126µV)
(MOD: OFF)
After input signal
from SSG, press [Ap-
ply] button to store
the adjustment value.
1) Adj item: [RSSI (Ref-
erence) (Narrow)]
2) Adj item: [Low]→
[Center]→[High]
SSG output
: –125dBm (0.126µV)
(MOD: OFF)
After input signal
from SSG, press [Ap-
ply] button to store
the adjustment value.
TK-5810
Measurement
Test-
Unit Terminal Unit
Rear ANT
panel
Ext.SP
connector
BG /5810H
( )
Adjustment
Specifi cations /
Parts Method
[Panel [Panel tuning mode]
tuning After input signal
mode] from SSG, press
[PF5] [PF5] key to store
the adjustment
[PC test value.
mode]
[Apply] [PC test mode]
After input signal
from SSG, press
[Apply] key to store
the adjustment
value.
BG
( )
Remarks
71