System Set-Up - Kenwood TK-5810 Service Manual

TK-5810 BG
(
Before Reading About System Set-up
The TK-5810(BG)/5810H(BG) is a transceiver main unit
(without a panel or speaker) that you complete by adding
options.
The options are classifi ed into three types according to
operation and function.
Merchandise received
License and frequency allocated by FCC
Choose the type of transceiver
TK-5810(BG)/5810H(BG) is complete by combining options
with only the transceiver body (without panel)
Are you using the handheld control head?
Are you using the remote kit?
See page 12
Please refer to the
KCH-14/15 service manual
(B51-8728-00) for serving
information, such as circuit
diagram, parts list and etc.
KCH-14 (Basic model)
Front panel kit
Are you using the printed keytops?
See page 12
Supplied accessory keytops
Service manual parts No. list
Model Parts No.
KRK-5/6DH B51-8445-20
KCH-14/15 B51-8728-00
KCH-16 B51-8834-00
4
/5810H BG
) ( )

SYSTEM SET-UP

YES
NO
YES
NO
See page 12
Please refer to the
KCH-14/15 service manual
(B51-8728-00) for serving
information, such as circuit
diagram, parts list and etc.
KCH-15 (Full-featured
model) Front panel kit
NO
YES
Transceiver programming
KCT-23 DC cable
Are you using the voice guide & storage unit?
NO
Are you using the external speaker?
NO
Are you using the keypad microphone?
NO
Delivery
1. Install the front panel kit (controller) directly on a radio to
operate it. (Form: Radio + KCH-14/15)
2. Remotely control one radio with one controller. (Form:
Radio + KRK-5 + KCH-14/15 + KCT-22M/M2/M3)
3. Remotely control one radio with two controllers. (Form:
Radio + KRK-6DH + KCH-14/15 (two) + KCT-22M/M2/M3
(two))
Type Frequency range
TK-5810(BG) K 450~520MHz
TK-5810(BG) K2 400~470MHz
450~500MHz
TK-5810H(BG) K
500~520MHz
TK-5810H(BG) K2 400~470MHz
Please refer to the KCH-16 service manual (B51-8834-00)
for serving information, such as circuit diagram,
installation, adjustment and etc.
Are you using one radio with two controllers?
Are you using one transceiver
with one controller?
See page 13
YES
Please refer to the
KRK-5/6DH service manual
(B51-8445-20) for serving
information, such as circuit
diagram, parts list and etc.
KRK-5
Single control head remote kit
(Option)
or
KCH-14 KCH-15
KCT-22M/M2/M3
Control cable
See page 5
A personal computer, programming interface (KPG-43/43A),
USB adapter (KCT-53U), and programming software
(KPG-95DG: ver. 6.10 or later) are required for programming.
(The frequency and signaling data are programmed for the transceiver.)
KCT-23 M,M3
YES
VGS-1
YES
KES-5
YES
KMC-28
RF power
45W~5W
45W~5W
100W~50W
60W~50W
100W~50W
YES
See page 15
Please refer to the
KRK-5/6DH service manual
(B51-8445-20) for serving
information, such as circuit
diagram, parts list and etc.
KRK-6DH
Dual control head remote kit
(Option)
or or
KCH-14 KCH-14 KCH-15
+
+ +
KCH-14 KCH-15 KCH-15
See pages 14 and 15
See page 17
(Option)
See page 17
(Option)
(Option)
Desk top microphone KMC-9B