9.24 Inner Media Cover
(1) Remove the three screws (TAPTITE BIND B M4x12) from the Panel holder.
(2) Insert a flat screwdriver into the three Holes, release the three Hooks at the center.
(3) Release the one Hook on the left as well.
TAPTITE BIND B M4x12
Panel holder
Hook
(4) Hold the section "A" and remove the Panel holder from the Upper cover in the
direction of the arrow.
Hooks
Hooks
Fig. 3-77
"A"
Fig. 3-78
3-74
TAPTITE BIND B M4x12
Holes
Hooks
Hooks
Flat screwdriver
Hook
Panel holder
Upper cover
Confidential