Ink Cartridge Cover, Inner Media Module Cover, Front Cover, And Wlan Pcb (For Wireless Lan-Enabled Models) - Brother DCP375CW Service Manual

6.1.8 Ink Cartridge Cover, Inner Media Module Cover, Front Cover, and WLAN
PCB
(for wireless LAN-enabled models)
(1) Lightly lift up the front end of the lower cover and remove the ink cartridge cover by
releasing its cover arm from the lower cover.
(2) On the inside of the front cover, release the retainer and slightly open the cover. Then
release the latches at the right and left ends of the inner media module cover (media module
*1
cover ) and remove the cover to the front.
For wireless LAN-enabled models, skip to step (4). For models not supporting wireless
LAN, proceed to step (3).
(3) Lightly lift up the front end of the lower cover and remove the front cover.
Grounding on MFC495CW/795CW
Grounding wire *
WLAN PCB harness *
Main PCB
Lower cover
2
*
Grounding wire *
Grounding on DCP375CW/J315W/J515W/J715W
and MFC255CW/J265W/J270W/J410W/J415W/J615W/J630W
*1 For DCPJ125/J315W/J515W/J715W/J140W and MFCJ220/J265W/J270W/J410/
J410W/J415W/J615W/J630W
Taptite, cup S
M3x6
2
2 *
2
Taptite, cup S
M3x10
Main PCB
2
*2 For wireless LAN-enabled models except for DCPJ140W
Main PCB shield
Boss
Latch
Inner media module cover
(Media module cover*
Retainer
Front cover
6-41
Rib
Latch
Boss
Socket
Ink cartridge
cover
1
)
(6_44_mini9e2)
Cover arm
Confidential