Items Relating To Prerolling (Nos. 401 To; Items Relating To Prerolling (Nos. 401 To - Sony 5500 Operation Manual

Items Relating to Prerolling (Nos. 401 to ...)

Item number Item
401 FUNCTION MODE
AFTER CUE-UP
403 CUEUP BY TC
404 CUEUP BY CTL
405 CUE MENU
DEFAULT MODE
select
406 CUE MENU
PREROLL OFFSET
152
Menu List
Setting Function
[stop] Selects the operation mode that the VTR changes to after
still completing a cue up operation.
stop: Enters stop mode.
still: Enters still-picture mode (search mode).
Note
When setting the standard constant on the editor and
control the unit, set to "stop".
capstan only This setting is only active when item 602 is set to "TC" or
[reel/capstan]
"UBIT".
capstan only: The tape runs with the pinch ON state during
reel/capstan: The tape runs with the pinch OFF state
[capstan only]
This setting is only active when item 602 is set to "CTL".
reel/capstan capstan only: The tape runs with the pinch ON state during
reel/capstan: The tape runs with the pinch OFF state during
When this unit is controlled by an editor (BVE-2000/BVE-
9100, etc), and the setting is "reel/capstan", cue up
operations are done at high speed.
Select "capstan only" when editing precision has priority.
[page mode]
Selects the default mode when the CUE menu is opened.
extend mode
page mode: PAGE mode
extend mode: EXTEND mode
[0 sec]
Sets the preroll time for a cueing up operation from the
CUE menu.
30 sec
cue up. (The maximum tape speed is ten times normal
tape speed.)
during cue up. When the tape nears the cue up point
and tape speed drops to slow, the pinch turns ON.
cue up. (The maximum tape speed is ten times normal
tape speed.)
cue up. When the tape nears the cue up point and tape
speed drops to slow, the pinch turns ON.