Introduction To Crxvision; Intended Use; Intended User; System Documentation - GE CRxVision Operating Manual

Intended Use

CRxVision:
The CRxVision will be used in an industrial environment by qualified staff to scan X-ray or
Gamma-ray exposed image plates for non destructive testing applications. It results in a
digital image which is sent to the dedicated workstation.
Image Plates:
The image plates will be used in an industrial environment by qualified staff for non
destructive testing applications. The image plates are scanned by a digitizer. The resulting
digital images are sent to the dedicated workstation.
Workstation / Rhythm - Software:
The CRxVision will be controlled and operated from a stationary or mobile workstation with
Rhythm RT or Rhythm RT Lite installed on it.
In addition a Digitizer Remote Display is available for CRxVision status and error messages.
NOTE: In case of a usage different to the intended use, the provided
safeguards may be reduced in their effectiveness.

Intended User

This manual has been written for trained users of GE computed radiography products and
trained X–Ray personnel who have received proper training.
Users are those persons who actually handle the equipment and those who have authority
over the equipment.
Before attempting to work with this equipment, the user must read, understand, note and
strictly observe all warnings, cautions and safety markings on the equipment.

System Documentation

The complete system documentation comprises:

This user manual

Service documentation

Online manual of Rhythm RT or Rhythm RT Lite
The service documentation is available from your local support organization for trained and
GE certified service personnel.
Always keep this user manual close to the system.
10

3 Introduction to CRxVision

CRxVision Operating Manual V1.2