Hide Group Prefix - Siemens HiPath 1100 Programming Manual

Step by Step
*
= FSK prior to ringing or during a conversation
5
6 = FSK during ringing or a conversation
Enter the next analog extension number.
or
Press this key.
#
Initial state for Programming Mode.

Hide Group Prefix

This settings allows an extension to receive an external
call over an external line belonging to a group of external
lines, and to hide the group number so it does not show
on the display. When a special access call is received
and transferred to an extension with this feature is en-
abled, the external line number does not show on the
display.
Example: An analog extension receives an external call
over an external line that belongs to Group 890 - num-
ber 24987049. When this feature is enabled, the display
show only 24987049. When this feature is disabled, the
display shows 89024987049, that is, the number for the
group of external lines followed by the external number.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
1 8 8
Enter the analog extension number (e.g., 12/102).
or
To activate/deactivate permission for Conditional Call
#
Forwarding:
= To activate
*
# = To deactivate (default)
Enter the next analog extension number
or
Press this key.
#
Initial state for Programming Mode.
To enable this feature, analog extensions must
be configured for CLIP .
Programming an Extension
69