Warning Tone For Calls Without Lcr; Example For Lcr Settings On A Local Network - Siemens HiPath 1100 Programming Manual

Main Configurations
Step by Step
38

Warning Tone for Calls without LCR

When the system is configured to use LCR, the HiPath
1100 can alert the user when an external call is being
places to a destination using a non-default carrier with
higher rates for that time of day. This may be due to the
unavailability of an external line for LCR (Least Cost
Routing).
When using a standard telephone, a warning tone indi-
cates to the user that a different carrier is completing
the call at this time. When using a system telephone,
the carrier's name will show on the display.
Required: Programming Mode must be active (*95
31994).
Enter the code for programming.
0 9 2
or
* # Activate/Deactivate Tone:
= To activate
*
= To deactivate (default)
#
Initial state for Programming Mode.

Example for LCR settings on a local network

This example shows a creation sequence and destina-
tion distribution:
• Mobile and
• Long Distance
"Telemobile" Option
1. To create and assing a name to a destination, for ex-
ample, "Telemobile".
2. Enter the Carrier(s) and the appropriate area codes
to be used for mobile calls.
3. For Destination enter all area codes or partial are
codes to cover all numbers for the mobile carrier
range.
4. Enter the time intervals in the Time Interval Table.
For "empty" time intervals, the trunk from the de-
fault carrier is seized directly and no CbC carrier is
used.
This features only works with ISDN lines.