Xdk Workbench - Welcome Screen; Hands On & Documentation; Feedback - Bosch XDK110 General Information Manual

!

3.2 XDK Workbench - Welcome Screen

Start the XDK Workbench by clicking on the XDK icon on your desktop. The default path for the
application is C:\XDK-Workbench\XDK-Workbench.exe.
During startup a splash screen appears. The welcome screen will be shown afterwards.
Picture 3: XDK Workbench Welcome Screen
#
The welcome screen is sectioned in four parts:
Hands-On & Documentation (upper left), Feedback (upper right), XDK-Examples (lower left) and
the Community feed (lower right; currently not available).
3.2.1 Hands On & Documentation
This section contains four buttons.
Click&Go:
Getting Started:
XDK Docs:
Eclipse Docs:

3.2.2 Feedback

Clicking the respective button will take you the matching XDK community forum section to get help,
to post a new application or to post an improvement.
Inside the community you will find hints, tips and tricks and you can get in touch with other
developers.
XDK110
© Bosch Connected Devices and Solutions GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as
copying and passing on to third parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
General Information Guide XDK110
Access to the empty workspace
The shortcut to the XDK Forum
This button will open the XDK help
This button will open the Eclipse help
Page ! 2 0
BCDS