Siemens SIPROTEC 5 Technical Data Manual page 27
High-voltage bay controller, v7.80 and higher
Hide thumbs
Also See for SIPROTEC 5:
- Manual (490 pages) ,
- Operation manual (218 pages) ,
- Hardware description manual (63 pages)
Table of Contents
Advertisement
Technical Data
11.8 Overcurrent Protection, Phases
Frequency Operating Range
0.9 ≤ f/f
≤ 1.1
rated
10 Hz ≤ f < 0.9 f
1.1 f
< f ≤ 80 Hz
rated
f < 10 Hz
f > 80 Hz
Tolerances
Currents, method of measurement = fundamental
component
Currents, method of measurement = RMS value, no filter applied
(33 % harmonics, in relation to fundamental component)
Up to 30th harmonic
Up to 50th harmonic, f
Up to 50th harmonic, f
Currents, method of measurement = RMS value
with filter for the compensation of the amplitude attenuation due to the anti-aliasing filter
(33 % harmonics, in relation to the fundamental component)
Up to 30 harmonic
Up to 50th harmonic, f
Up to 50th harmonic, f
Currents, method of measurement = RMS value
with filter for the gain of harmonics (including compensation of the amplitude attenuation
(33 % harmonics, in relation to the fundamental component)
Up to 30 harmonic
Up to 50th harmonic, f
Up to 50th harmonic, f
Time delays
38
In case that the filter response exactly matches the user-defined gain factors
39
In case that the user-defined gain factor is set below 3. The tolerance increases, if the gain factor is larger.
40
In case that the user-defined gain factor is set below 7. The tolerance increases, if the gain factor is larger.
41
In case that the user-defined gain factor is set below 7. The tolerance increases, if the gain factor is larger.
1122
rated
= 50 Hz
rated
= 60 Hz
rated
= 50 Hz
rated
= 60 Hz
rated
= 50 Hz
rated
= 60 Hz
rated
According to specified tolerances
Slightly expanded tolerances
Active
1 % of the setting value or 5 mA (I
or 25 mA (I
= 5 A), (f
rated
rated
1 % of the setting value or 5 mA (I
or 25 mA (I
= 5 A), (f
rated
rated
3 % of the setting value or 20 mA (I
or 100 mA (I
= 5 A), (f
rated
rated
4 % of the setting value or 20 mA (I
or 100 mA (I
= 5 A), (f
rated
rated
1 % of the setting value or 5 mA (I
or 25 mA (I
= 5 A), (f
rated
rated
2 % of the setting value or 10 mA (I
or 50 mA (I
= 5 A), (f
rated
rated
3 % of the setting value or 20 mA (I
or 100 mA (I
= 5 A), (f
rated
rated
1.5 % of the setting value or 10 mA (I
or 50 mA (I
= 5 A), (f
rated
rated
3% of the setting value or 20 mA (I
or 100 mA (I
= 5 A), (f
rated
rated
4 % of the setting value or 20 mA (I
or 100 mA (I
= 5 A), (f
rated
rated
1 % of the setting value or 10 ms
SIPROTEC 5, High-Voltage Bay Controller, Manual
C53000-G5040-C015-A, Edition 05.2018
= 1 A)
rated
± 10 %)
= 1 A)
rated
± 10 %)
= 1 A)
rated
± 10 %)
= 1 A)
rated
± 10 %)
= 1 A)
rated
± 10 %)
= 1 A)
rated
± 10 %)
= 1 A)
rated
± 10 %)
38
= 1 A)
rated
± 10 %)
39
= 1 A)
rated
± 10 %)
40
= 1 A)
rated
± 10 %)
41
Hide quick links:
Advertisement
Table of Contents
