Table of Contents
Advertisement
Installation & Operation Manual
Figure 46
9.3.1 Heat/Cool Screen
The Heating/Cooling screen can be accessed from the Home screen
through the Service menu. From the Heating/ Cooling screen the user can
see the actual state of the diff erent points that are involved and needed
for the cooling and heating operation respectively.
The runtime hours and counters for the compressors are displayed and
can be reset by navigating selecting and changing the particular value.
Figure 47
Figure 48
BTC 469503103 A | 02.2019
Control Air M/M+ Water to Water Applications | 23
9.3.2 UPM Status Screen
The UPM Status screen can be accessed from the home
Screen via the Service Menu. Once an alarm is received via pulse
feedback from the UPM board, it is displayed in the screen as shown
below. From this screen the user may reset the UPM board after it has
enter the lockout mode by navigating to "Reset UPM now?" selecting yes.
Figure 49
Data subject to change
Advertisement
Table of Contents
